PD-200

The PD-200 is suitable for mounting a large number of adapters. A 139,7 mm (5 ½ inch) or a 177,8 mm (7 inch) adapter is mounted standard. In addition to available inserts, it is possible to mount a 120.6 mm adapter on your PD-200. Adapters are also available for different square posts. For posts of 10 x 10 cm you can use the standard adapter (139.7 mm round). Furthermore, 101.6 x 152.4 mm and 152.4 x 152.4 mm square adapters can be used.

For the 5 ½ inch version of the PD-200 inserts can be inserted into the standard adapter. It is important that there is not too much space between the post and the machine. This damages the post and the machine, and it reduces the impact force. For this reason inserts are available between 63.5 mm and 120.6 mm.

For the 7 inch version of the PD-200 inserts can be inserted into the standard adapter. It is important that there is not too much space between the post and the machine. This damages the post and the machine, and it reduces the impact force. For this reason, inserts are available between 63.5 mm and 133.4 mm.

The throttle valve kit from Rhino is of high quality. This is equipped with a safety device so that the postdriver can not be activated unexpectedly. This throttle valve kit has also an protective advantage for your hand.

The Filter-Regulator-Lubricator of Rhino is essential for maintaining your pneumatic machine. This center filters, seperates the water from the compressed air, provides a constant air pressure and adds oil. This keeps your machine more resistant to, for example, rust and damage inside the machine. Comes standard with frame.